TP-Link TD-W8968 User Manual page 92

TD-W8968
Statistics Status: Enable or Disable. The default value is disabled. To enable it, click the
Enable. If it is disabled, the function of DoS protection in Security settings will be disabled.
Statistics Interval (5-60): The default value is 10. Select a value between 5 and 60 seconds
in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Click the Refresh button to refresh immediately.
Statistics Table:
IP/MAC Address
Packets
Total
Bytes
Packets
Bytes
ICMP Tx
Current
UDP Tx
SYN Tx
Reset
Operation
Delete
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-82
The IP and MAC address are displayed with related statistics.
The total number of packets received and transmitted by the Modem Router.
The total number of bytes received and transmitted by the Modem Router.
The total number of packets received and transmitted in the last Packets
Statistic interval seconds.
The total number of bytes received and transmitted in the last Packets
Statistic interval seconds.
The number of the ICMP packets transmitted to WAN per second at the
specified Packets Statistics interval. It is shown like "current transmitting rate
/ Max transmitting rate".
The number of UDP packets transmitted to the WAN per second at the
specified Packets Statistics interval. It is shown like "current transmitting rate
/ Max transmitting rate".
The number of TCP SYN packets transmitted to the WAN per second at the
specified Packets Statistics interval. It is shown like "current transmitting rate
/ Max transmitting rate".
Reset the value of he entry to zero.
Delete the existing entry in the table.
83