Sign in today to find solutions:

Don't have an account? Sign up

   
TD-W8968
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-10
4.4.2.1 Dynamic IP
Select this option, the Modem Router will be able to obtain IP network information dynamically
from a DHCP server provided by your ISP (as shown Figure 4-10). The next configuration is
similar to Dynamic IP over ATM interface (see section
4.4.1.2 Dynamic
IP)
4.4.2.2 Static IP
Select this option if your ISP provides static IP information to you and you want to use an Ethernet
Interface. You should set static IP address, IP subnet mask, gateway address, DNS Server and
Secondary DNS Server in the screen below. The next configuration is similar to Static IP for WAN
Settings (see section
4.4.1.1 Static
IP)
29
Next page -> <- Previous page

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: