Mac Clone; Alg Settings - TP-Link TD-W8968 User Manual

TD-W8968
• Leased Time: The Leased Time is the amount of time in which a network user will be
allowed connection to the Modem Router with their current dynamic IP address. Enter the
amount of time, in hours, then the user will be "leased" this dynamic IP address. After the
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP
address. The default is 1440 minutes.
The detailed configuration about DHCP server, please refer to section

4.4.5 MAC Clone

Choose menu "Advanced Setup" "MAC Clone", you can configure the MAC address of the
WAN Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section
WAN Settings, 4.4.2 Ethernet WAN
WAN Interface from the drop-down list and click Clone button to clone your current PC MAC, and
then click Save.
Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not
be the same with each other.

4.4.6 ALG Settings

Choose menu "Advanced Setup" "ALG Settings", and then you can configure the basic
security in the screen as shown in Figure 4-17.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
and its default MAC Address. You can select corresponding
Figure 4-16
34
4.5 DHCP Server.
4.4.1