Special Features; How To Use - Britax FORWARD FACING CHILD RESTRAINT Instruction Book

SPECIAL FEATURES

To be used only in forward-facing position for a child weighing from 8kg to 18kg
Upper Anchorage Upper Anchorage
Strap Adjuster. Storage Strap.
Two position
Adjustable height
of shoulder straps.
Fully adjustable
6 point harness.
Padded cover
for comfort.
Harness
Adjuster
Lock.
(Under Flap)
Harness
Adjustment
Strap.
Recline
Latch.
Harness
Tongues
8
Front of vehicle
Adjustable Upper Attachment Anchor Fitting.
Anchorage Strap Clip & Cover.
Length 1210 mm
from back of
restraint.
Easy fitting of
lap or lap-sash
Quick release
Harness Buckle. Support Base.
(Red button)
Harness
Buckle
ADJUSTING SHOULDER HARNESS STRAPS HEIGHT
Correct fitment of the harness is very important as it restrains the child in the restraint. The
harness must fit firmly around the upper torso of the child and be positioned so as to leave the
child's arms and legs free.
FOR CHILD USE: The shoulder straps must be in the slots
which are nearest to the child's shoulders, but not more than
25mm below the child's shoulders. If the harness straps are
more than 25 mm below the level of the child's shoulders
then the child is too large for the
restraint and the restraint
should not be used.
The shoulder straps must be in
the slots which are nearest to
the child's shoulders, but not
more than 25mm below the
child's shoulders.
Front of vehicle
Vehicle
seat belt.
STEPS IN CHANGING SHOULDER STRAP SLOTS
A. Remove the restraint from the vehicle.
B. Lengthen harness as instructed on page 12 point A.
C. At the rear of the restraint, remove one of the harness shoulder
straps from metal Strap Connector by slipping strap through
open slot. The metal Strap Connector is shown right.
D. Pull one strap through slot.
E. Insert shoulder harness strap through slot which will
position shoulder harness strap level with or above the
seat belts.
child's shoulders as shown right. Ensure that the shoulder
harness strap passes through matching slots in cover & body.
F. Ensure there are no twists in the harness strap and connect
shoulder harness strap to metal Strap Connector at rear of
restraint.
G. Repeat for other shoulder harness strap. It is better to change
one strap at a time so that the other strap will be a guide for
re-assembly.
WARNING: Do not use the restraint with harness
shoulder straps set at different heights or fed through
mis-matching slots. Ensure harness straps are not twisted and
that all straps are secure by pulling each harness strap.

HOW TO USE

1 1
2 2
3 3 3 3
4 4
5 5 5 5
6 6
6 6
25mm
1. Upper shoulder strap slots.
2. Lower shoulder strap slots.
3. Shoulder harness straps.
4. Harness tongues & buckle.
5. Lap strap slots.
6. Crotch strap slots.
Strap Connector
13