How To Clean - Britax FORWARD FACING CHILD RESTRAINT Instruction Book

HOW TO CLEAN

The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions
are on the care label attached to the cover. If fluffy cover is fitted then washing cover prior to use
will remove excess fluff. Ensure that the inside of the buckle is free of foreign matter. Cleaning
instructions are on page 15. Use only mild soap and water to clean all metal and plastic parts of
the restraint.
TO REMOVE COVER:
A. Remove the restraint from vehicle as instructed on page 7.
B. Disengage harness tongues from harness buckle.
C. Remove any accessories, if fitted as instructed on page 16.
D. Disengage harness straps from harness Strap Connector as instructed on page 13, item C.
E. Unhook the cover at the top and bottom of the restraint. Peel cover from outer rim of the body
starting from on both sides and then at
F. Remove the cover while feeding the Harness Tongues & Crotch Buckle through the lap strap
slots in the cover.
Do not remove Harness Adjustment Strap from Harness Adjustment Strap Lock.
TO REPLACE COVER:
A. Feed the Harness straps and Harness Tongues
through Lap Strap Slots and through matching
shoulder strap slots in the cover and seat.
B. Stretch cover over the top of the restraint first at
then the sides at , as instructed above and then
stretch the cover around the rim of the restraint.
C. Re-fit the Seat Cover attachments.
D. Re-engage harness straps to Harness Strap Connector
as instructed on page 13, item E to G.
E. Feed Crotch Buckle through slots in cover.
COVER
(STYLE MAY VARY)
The cover has been designed to protect your child when
seated in the restraint. Care should be taken if children
either eat or drink while in the restraint as some food or
drink products may cause damage or marking to the cover.
IMPORTANT: Do not pull sticky items from covers as the
cover may be damaged - soak in water and gently remove.
14
, at the top.
Shoulder
Strap Slots
,
Harness
Adjustment
Strap
Cover Hooks
HOW TO INSTALL
TO REMOVE RESTRAINT FROM VEHICLE
A. Disengage seat belt tongue from buckle and remove from restraint.
B. Fully press Upper Anchorage Strap Adjuster Button (A)
while pulling Upper Anchorage Strap (B) to slacken as
shown right. In some vehicles loosening of the Upper
Anchorage Strap may be difficult. If so, try pushing the
restraint against the vehicle seat back or slightly lifting
the restraint to release the tension.
C. Disengage Attachment Clip from Anchor Fitting. The
child restraint is now disconnected.
Fully press Adjuster Button (A)
while pulling Upper Anchorage
Strap (B) to lengthen.
A B
Pull Adjustment Strap
Storage
to remove slack
Strap
7