Blending With The Blender Jug - Breville BFP300 Instructions Manual

Assembling and using of your Breville Wizz™ Processor Duo
continued
Step 2. To attach blender jug lid, position the lid
on top of the blender jug and rotate anti-
clockwise to slot the locking tab on the lid
into the interlocking safety catch on the
handle (see figure ).
2
Always ensure that the blender jug lid is
locked firmly into place before operating.
the appliance will not operate if the food
processor bowl, blender jug and lids are not
correctly assembled.
Blending with the blender jug
Step 1.
To commence blending turn the speed
control dial clockwise to the desired speed.
If the Pulse setting is required, press the
button located in the centre of the speed
control dial and hold briefly for short bursts
of power.
Step 2. To remove blender jug, hold handle
and turn in a clockwise direction. When
finished using the blender jug, always
remove the blender jug from the motor
base and insert the blender safety lock
cover. Place the blender safety lock cover
onto base aligning the arrow on the cover
with symbol on the base and turn anti-
clockwise until it locks into place, aligned
with the symbol.
1
If the blades or discs should jam while
processing or blending, ensure dial is turned
to the off (0) position and the appliance is
switched off at the power outlet and the power
cord is unplugged. Remove the processor
bowl lid or blender jug lid and adjust any food
wedged between the blade and the processor
bowl or blender jug, or in the disc. Replace the
lid and proceed as normal. If this occurs again,
the food processor bowl or blender jug may be
overloaded, so remove some of the food and
process in smaller batches.
neVeR place hands inside the blender jug when
it is fitted to the Wizz™ Processor Duo motor
base. Always use a spatula provided or other
plastic utensil to push food back onto blades,
as the blades in the blender jug are sharp.