Symbol MC9090G User Manual page 112

3 - 16 MC909X Mobile Computer User Guide
Prior to creating a connection, ensure the following:
•
Bluetooth phone is turned on.
•
Bluetooth phone is discoverable. (Some phones may also need to be pairable in order to accept a bonding
request. For more information, refer to the phone documentation.)
•
Mobile computer's and phone's Bluetooth radios are turned on.
•
Mobile computer and phone are within range of each other (30 feet/10 meters).
Complete the following steps to create a new Bluetooth connection. Before setting up dial-up networking, obtain
dial-up information and other necessary settings for the office network or ISP.
Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-22.
1.
Discover and bond (pair) with the remote device.See Bonding with Discovered Device(s) on page 3-9.
2.
In , select the
3. BTExplorer
Select the
4. Trusted Devices
Tap the remote device folder.
5.
Tap and hold on
6.
window appears.
Entry
Select Dial-up Networking Entry Window
Figure 3-22
NOTE If a dial-up entry is not listed, see Add a Dial-up Entry on page 3-17.
Select a dial-up entry.
7.
Tap . The mobile computer begins to communicate with the phone. If required, the phone requests
8. OK
permission to communicate with the mobile computer.
Confirm the connection on the phone. The
9.
folder.
Remote Devices
folder.
and select
Dial-up Networking
Network Log On
from the pop-up menu. The
Connect
window appears.
Select Dial-up Networking