Symbol MC9090G User Manual page 227

boot or boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic
tests and configure hardware and software.
C
CAM. (Continuously Aware Mode) Mode in which the adapter is instructed to continually check for network activity.
CDMA. (Code Division Multiple Access) A digital cellular technology that uses spread spectrum techniques that separates
them through the use of digital frequency codes across the full available spectrum.
CDRH. (Center for Devices and Radiological Health) A federal agency responsible for regulating laser product safety. This
agency specifies various laser operation classes based on power output during operation.
CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all laser
output were directed into the eye's pupil. There are no special operating procedures for this class.
CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses
no danger for unintentional direct human exposure.
CHAP. (Challenge Handshake Authentication Protocol) A type of authentication in which the authentication agent (typically
a network server) sends the client program a random value that is used only once and an ID value. Both the sender and
peer share a predefined secret. The peer concatenates the random value (or nonce), the ID and the secret and
calculates a one-way hash using MD5. The hash value is sent to the authenticator, which in turn builds that same string
on its side, calculates the MD5 sum itself and compares the result with the value received from the peer. If the values
match, the peer is authenticated.
Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a
number, letter, punctuation mark, or communications control contained in a message.
Character Set. Those characters available for encoding in a particular bar code symbology.
Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula
and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are
optional for other symbologies. Using check digits decreases the chance of substitution errors when a symbol is
decoded.
Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters: (-$:/,+).
Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra
symbol elements.
Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types,
including all uppercase letters, numerals from 0 to 9 and 7 special characters (space, minus (-), plus (+), period (.), dollar
sign ($), slash (/), and percent (%)). The code name is derived from the fact that 3 of 9 elements representing a character
are wide, while the remaining 6 are narrow.
Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding
density than Code 39.
Code Length. Number of data characters in a bar code between the start and stop characters, not including those
characters.
Glossary - 3