Table of Contents
Advertisement
SC826 Chassis Manual
4-7
Checking the Air Flow
Figure 4-12: Air Shroud in place SC826LP Chassis
Checking the Server's Air Flow
1.
Make sure there are no objects to obstruct airflow in and out of the server. In
addition, if you are using a front bezel, make sure the bezel's filter is replaced
periodically.
2.
Do not operate the server without drives or drive trays in the drive bays. Use
only recommended server parts.
3.
Make sure no wires or foreign objects obstruct air flow through the chassis.
Pull all excess cabling out of the airflow path or use shorter cables.
The control panel LEDs inform you of system status. See "Chapter 3: System
Interface" for details on the LEDs and the control panel buttons.
4-14
Advertisement
Table of Contents
