Chassis Setup and Maintenance
4-1
Overview
This chapter covers the steps required to install components and perform main-
tenance on the chassis. The only tool you will need to install components and
perform maintenance is a Phillips screwdriver, and under certain circumstances,
a hex wrench. Print this page to use as a reference while setting up your chassis.
4-2
Installation Steps
Removing the Chassis Cover
Installing Hard Drives
Installing the Motherboard
Installing the Air Shroud
Completing the Installation
!
Chapter 4: Chassis Setup and Maintenance
Chapter 4
Review the warnings and precautions listed in the manual be-
fore setting up or servicing this chassis. These include infor-
mation in Chapter 2: System Safety and the warning/precau-
tions listed in the setup instructions.
4-1
4-2
4-3
4-6
4-13
4-15