Table of Contents
Advertisement
SC826 Chassis Manual
Add-on Card Setup (SC826 LP Chassis)
SC826 chassis provides seven low profile add-on card slots.
Add-on/Expansion
Card Slots
Installing Add-on Cards in the Sc826lp (Low Profile) Chassis:
1. Disconnect the power supply, lay the chassis on a flat surface, and open the
chassis cover.
2. Remove the screw holding the cover in place for each low profile add-on/ex-
pansion card slot you want to use. Keep this screw for later use.
3. Connect the add-on cards and/or expansion cards to the mother board.
4. Secure each card to the chassis using the card's L bracket and the screw
previously removed.
Figure 4-10: SC826 LP model
4-12
Advertisement
Table of Contents
