4-6
Installing the Air Shroud
Figure 4-11: Air Shroud for SC826LP Chassis
Air shrouds concentrate airflow to maximize fan efficiency. The SC826 chassis air
shroud does not require screws to set up.
Installing the Air Shroud
1.
Lay the chassis on a flat, stable surface and remove the chassis cover.
2.
If necessary, move any cables that interfere with the air shroud placement.
3.
Place the air shroud in the chassis. The air shroud fits just behind the two
fans closest to the power supply. Slide the air shroud into the grooves just
behind the fan rack.
Note that if a 16 DIMM (13.68" x 13") motherboard is used, it is necessary to use
the optional MCP-310-82502-0N air shroud. For ordering information, visit the
Supermicro website at www.supermicro.com and click on the Where to Buy link.
Chapter 4: Chassis Setup and Maintenance
4-13