NAIM NAIMUNITI Manual page 13

Na im Un it i Setu p
Select the Large+Sub option when a subwoofer is
connected to NaimUniti and used to augment the low
frequency performance of large (full bandwidth) speakers.
Select Large when no subwoofer is used (the NaimUniti
subwoofer output is switched off when Large is selected).
Select Small+Sub when a subwoofer is used to provide
the low frequency component of a speaker system
incorporating small (restricted bandwidth) satellite
speakers. When Small+Sub is specified, a 100Hz high-pass
filter is applied to the NaimUniti speaker output signal.
The speaker Max. Volume
maximum allowed volume, and the channel balance
respectively.
4. 5 The Head phone s M en u
The Headphones setup menu
enables the Max. Volume
parameter to be specified:
Parameter Options
Max. Volume: 0 to 100 (adjust
using handset
or 5 keys)
4.6 The Network Settings Menu
The Network Settings menu
enables NaimUniti network
parameters to be customised
to suit the router and network.
The options are tabulated
and described in the following
sections:
Parameter Options
Name: User definable (text entry)
Default: Uniti-xxxx
Wireless:
None / Wireless Network Names
Status: E thernet OK / No Network / Connecting /
OK. Signal xxx% (value reflects signal level)
DHCP: Yes / No
The Name parameter enables the NaimUniti's default
network name to be changed.
The Wireless parameter enables a wireless network to be
chosen and joined. See Section 4.6.1 below for detailed
wireless set up notes.
Network Status displays the current network connection
status.
The DHCP parameter enables the NaimUniti network
settings to be modified. In most cases, specifying Yes
leaving NaimUniti set to DHCP, will be the appropriate
option. See Section 4.6.2 below for notes on non-DHCP
network connection.
Note: Devices installed on a network have an IP address
through which they are identified by all the other items
and Balance parameters specify
Headphones 1/1
4Max. Volume: 100
6
Network Settings 1/4
Uniti-0131
4Name:
Wireless: None
Status: Connecting
DHCP Yes
and
on the network. DHCP is a set of rules that enable the
automatic allocation of addresses as items are connected
(or switched on while connected) to the network.
NaimUniti is set up by default to use DHCP.
Note: If NaimUniti is connected to the network both
wirelessly and via ethernet (wired), the ethernet
connection will take priority.
4.6.1 Wireless Network
Connection Set Up
If the Wireless parameter is
selected in the Network Settings
menu the Select Network menu
will display a list of the available
networks. An option not to use a wireless connection is
also provided. Use the handset up (
to scroll through the list and the
network.
Note: NaimUniti is compatible with most commonly used
WiFi standards. Routers that support 802.11b and 802.11g
will work, however those with 802.11g compatibility are
recommended for best results.
Note: NaimUniti cannot connect to a "hidden" wireless
network.
If the selected network is secure
and requires a passphrase or
access key to join, NaimUniti will
display an alert message. Pressing
the handset ok/list key will then
open a text entry screen for entry
of the passphrase or access key.
Use the handset numeric/text
keys to enter the passphrase or
access key taking care to ensure
that the letter case is correct.
Press the handset ok/list key
when text entry is complete. In
the illustration the passphrase is
"flatfish".
If the network is successfully
joined NaimUniti will display a
confirmation screen.
If an incorrect passphrase or
access key is entered NaimUniti
will display an alert message.
Note:
As a security measure,
a router may also require the
NaimUniti's MAC address to be entered before allowing
it to join the wireless network. This type of security feature
is known as 'MAC address filtering'. The NaimUniti MAC
address is shown in the 'Factory settings > System Status'
page.
Select Network 3/6
<Don't Use Wireless>
LingNet
4GreenNet
TomNet
5 6
) or down ( ) keys
ok/list key to select a
Now enter your wireless
passphrase or access key.
Press OK to continue
flatfish abc
f l a t f i s h _
Press OK to confirm
Connected
Press OK To Finish
Can't Login
Press OK To Re-Try
E11