Error/Warning Message List - Toshiba D-VR4 Owner's Manual

Error/Warning message list

ERROR/WARNING MESSAGE
Power ON
SYSTEM ERROR
PLEASE WAIT
SYSTEM ERROR
PLEASE WAIT
DISC CHECKING
SYSTEM ERROR
DISC MIGHT BE FAILED
PRESS ENTER/SELECT
Playback
NO DISC
REGION CODE ERROR
INCORRECT DISC - C104, C105,
C106, C107
Recording
NO DISC
PROCESSING
PLEASE WAIT
RECORDING INTERRUPTED -
C204
CANNOT RECORD - C203
CANNOT RECORD - C206
CANNOT RECORD, DISC PROTECTED
CANNOT RECORD - C208
CANNOT RECORD - C209
CANNOT RECORD - C210
DISC ERROR - C205, C211, C212,
C213
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF TITLES
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF CHAPTERS
CANNOT RECORD
PROTECTED IMAGE
RECORDING INTERUPTED
PROTECTED IMAGE
CANNOT RECORD IN VIDEO MODE.
COPY IMAGE ONCE ONLY.
CANNOT RECORD ON DISC.
THIS IS NOT CPRM DISC.
SWITCHING TO INTERLACE OUT-
Dubbing
PUT FOR COPYING
CANNOT COPY DATA - C251
CANNOT COPY DATA - C254, C255
COPYING INTERRUPTED
DISC ERROR - C302, C303
Disc setup
DISC ERROR - C304, C305
DISC ERROR - C306
DISC ERROR - C307, C308
CANNOT EDIT
Title Menu
CANNOT EDIT - C408
PROCESSING
PLEASE WAIT
NOTE: Any error/warning message other than those above might appear. Take measures against such a mes-
sage by seeing the possible solutions above.
2G10101A P80-P85
The power was shut down without completing the
termination process due to a power failure or dis-
connection of the AC cord plug. (Abnormal termi-
nation)
The power was abruptly turned off before writ-
ing to the disc was completed.
The data restoration was completed.
When a disc was not loaded in the unit, PLAY
was pressed.
A disc specified other than "Region 1" or "Region
ALL" was loaded.
The disc cannot be identified.
When a disc was not loaded into the unit, REC/
OTR was pressed.
The recording termination is processing.
Disc became full during recording.
Recording was tried onto the disc having no space.
Recording was tried onto the disc which does not
support recording.
Disc erase-protection is applied.
Recording was tried onto the finalized disc.
Adding data was tried onto the disc recorded in
the other unit.
Adding data was tried to the disc where PC data
was recorded.
A scratch or contamination was found on the disc.
99 titles were recorded on the disc.
999 chapters exist on the disc.
Recording was attempted on a copy protected
video.
The video was changed to a copy-guard format
in recording.
Recording was attempted of a "Copy Once" program
onto a disc (Video mode).
Recording was attempted of a "Copy Once" program
onto a disc without CPRM.
Dubbing was initiated from a disc to a video tape
in the progressive scan mode.
No video tape or disc is inserted as a source for
the recording.
The source video or disc to be copied is copy-
guarded.
The video tape or disc became full during dubbing.
Cannot Format disc due to a scratch or contami-
nation on the disc.
Cannot Finalize disc due to a scratch or con-
tamination on the disc.
Cannot Undo Finalize disc due to a scratch or
contamination on the disc.
Cannot Protect disc ON/OFF due to a scratch
or contamination on the disc.
Editing cannot be performed due to a scratch or
contamination on the disc.
Combining chapters cannot be performed.
A process requiring a longer time such as edit-
ing is being performed.
85
CAUSE POSSIBLE SOLUTIONS
Wait until the message disappears.
The data is now restoring.
Press ENTER, then the screen re-
turns to the normal display. The data
may not be restored even if the res-
toration process is performed.
Load a disc.
A disc specified other than "Region
1" or "Region ALL" cannot be played
back.
Check the disc and load a proper
disc.
Load a disc.
Wait until the process is completed.
Erase unnecessary titles or load
another disc and restart recording.
Check the disc space.
Load a recordable disc.
RAM Disc:
Turn the protect switch to OFF on
the cartridge itself.
Or turn OFF the protect from Disc
Setup.
Undo finalization or load another
disc for recording.
Load another disc for recording.
Load another disc for recording.
Check the disc and reload it, or use
another disc for recording.
Erase unnecessary titles or load
another disc.
Erase unnecessary chapters or
load another disc.
You cannot record a copy protected
video.
You cannot record a copy protected
video.
Load a DVD-RW Ver. 1.1 or later
(VR mode) with CPRM.
Load a DVD-RW Ver. 1.1 or later
(VR mode) with CPRM.
The mode is automatically changed
to interlaced mode if dubbing from
a disc to a video tape.
Load a video tape or disc into the
source drive.
You cannot dub a video containing
copy-guarded material.
Load another video tape or disc for
recording and restart.
Check the disc and reload it, or use
another disc for recording.
Check the disc and reload it, or use
another disc for recording.
Check the disc and reload it, or use
another disc for recording.
Check the disc and reload it, or use
another disc for recording.
Check the disc and reload it, or use
another disc for recording.
Chapter marks that have been
added automatically in the erasing
of a scene procedure cannot be
erased.
Wait until the process is complete.
2/25/05, 1:32 AM
PAGE
--
--
52
33
9
9
54
--
72
35
10
28
28
--
--
--
73
70
53
53
53
53
78
77, 78
53
77, 78
--
--
--
--
--
70
--
85