Toshiba D-VR4 Owner's Manual page 66

Editing the disc
Editing a playlist
NOTE:
It is no problem to omit the proce-
dures for confirming the scene or
adjusting start and end points.
66
2G10101A P62-P70
5
Press
scene that you want to erase and press ENTER. (To set the start
point easily, search the start point while "SET START" is selected)
The still image at the start point appears at the left small screen.
6
Press
you want to erase and press ENTER.
The still image at the end point appears at the right small screen.
7
Check the erased scenes.
• Select "Preview" and press ENTER. Then the video where the
scenes between the start and end points are erased is played
back.
• Each operation button (F.FWD, REW, SKIP +, SKIP -, PLAY,
PAUSE/STILL) for playback also can be used.
8
Adjust the start and end points.
• To adjust the start point, select "Adjust start" and press ENTER.
You can change the start point by pressing
• To adjust the end point, select "Adjust end" and press ENTER.
You can change the end point in the same way as the start point.
9
If you determine the scene to be erased, press
"Finish" and press ENTER.
• A chapter mark is automatically added at the location of the
erased scene.
66
or to select "SET START" at the start point of the
EDIT TITLE
NAME Family
CHAPTER 2/3
00:11:42
LENGTH 00:11:42/00:30:17
Adjust start
SET END
Finish
00:10:20
Preview
SELECT
ENTER RETURN BACK
ENTER
or to select "SET END" at the end point of the scene
EDIT TITLE
NAME Family
CHAPTER 2/3
00:15:58
LENGTH 00:15:58/00:30:17
Adjust start
Adjust end
Finish
00:10:20
Preview
SELECT
ENTER ENTER RETURN BACK
2/25/05, 1:32 AM
00:11:42
TITLE
END
MENU
00:15:58
TITLE
END
MENU
or .
or to select