Error/Warning Message List - Toshiba D-VR600 Owner's Manual

Additional information

Error/Warning message list

ERROR/WARNING MESSAGE
General
Processing...
Please wait.
Power ON Recovering from previous error.
Please wait...
Playback Incorrect disc
Disc Empty
Wrong region
Wrong Rating
No audio
No subtitle
Cannot play this file
Recording Insert the recordable disc first.
Disc is Full
Recording stopped because disc is
full
Cannot record. The Disc is full.
Insert a new disc first.
Cannot record,
disc protected
Cannot record.
Disc finalized.
Protected content
The content you want to record is
protected.
Cannot record in VIDEO MODE.
Copy image once only.
Cannot record in DVD+R/DVD+RW.
Copy image once only.
This is not CPRM disc.
Cannot record on disc.
Cannot record. The total titles are up
to 99 titles.
Cannot record, exceeds limited
number of chapters.
Timer Recording suspended
Timer
recording
Timer Recording failed
Input source
The connected DV is not supported
completely.
Disc setup Protect process is failed
Poor disc notification
NOTE: Any error/warning message other than those above might appear. Take measures against such a
message by reading the possible solutions above.
74
2K70101A_E P70-74
CAUSE
This symbol means either the
feature you tried is not available on
the disc, or the DVD/VCR cannot
access the feature at this time.
A process requires a longer time
such as editing is being performed.
The power was abruptly turned off
before writing to the disc was
completed.
The disc cannot be identified.
There is no contents on the disc.
A disc specified other than Region 1
or Region ALL was loaded.
The playback is restricted by
parental control setting.
The disc does not have audio.
The disc does not have subtitle.
The selected DivX
playable.
When a recordable disc was not
loaded into the unit, REC/OTR was
pressed.
The recording termination is
processing.
Disc became full during recording.
When a disc was loaded into the
unit, REC/OTR was pressed.
Recording to the protected disc.
Recording to the finalized disc.
Copy guarded content.
Recording was attempted on a Copy
Once program onto a disc (Video
mode).
This unit does not support recording
Copy Once program to DVD+RW/+R
disc.
Recording was attempted on a Copy
Once program onto a disc without
CPRM.
99 titles were recorded on the disc.
999 chapters exist on the disc.
Timer Recording error.
When Timer Recording is started, no
space disc was inserted.
This unit may not support the
connected DV equipment com-
pletely.
The disc protect process is failed
due to a scratch or contamination on
the disc.
Error. The disc is damaged or not
compatible and cannot be used for
recording.
74
POSSIBLE SOLUTIONS
Wait until the process is completed.
The data is now restoring.
Check the disc and load a proper disc.
Load another disc.
A disc specified other than Region 1
or Region ALL cannot be played back.
Check the parental control level.
® file is not Check the DivX
Load a recordable disc.
Wait until the process is completed.
( changes to
Press OK, and load a recordable disc.
Erase unnecessary titles/chapters or
load another recordable disc.
Release the disc protection.
Unfinalize the disc.
You cannot record a copy protected
content.
Record on a disc with CPRM.
Record on a disc with CPRM.
Record on a disc with CPRM.
Erase unnecessary titles or load
another disc.
Erase unnecessary chapters or load
another disc.
Check the timer recording program.
Load another disc for recording.
Check the disc and reload it.
Press OK. Use another disc.
08`02`07, 20:46
® file specifications.
)