Compaq 195294-001 - ProLiant - ML370R Quick Install Manual page 50

3-12 Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant ML370
b.
Date, Time, and Time Zone
Modify the current date, time, and time zone as necessary. Only U.S.
time zones are available during Quick Install. Time zone information
can be changed after Quick Install by using the UnixWare
SCOadmin system administration tools. For more information, see
the "Understanding Preinstallation Tasks and Considerations"
section in this chapter.
c.
Cluster name
Enter the name of the cluster.
d.
System owner identity and passwords
Enter the full name of the system owner, the system owner login ID,
and the system owner and root passwords. Passwords are not
displayed and must be repeated to verify that they are entered
correctly.
e.
IP interconnect
NOTE: The IP interconnect screen is not displayed during the installation of ServerNet I
cluster interconnects.
Accept the default values, or enter the node 1 hostname and IP
address for the cluster interconnect, the node 2 hostname and IP
address for the cluster interconnect, and the netmask. The Ethernet
cluster interconnect addresses must be on the same network.
f.
Network configuration
Enter the external network configuration: domain name, CVIP
address, netmask, node 1 hostname and IP address for the public
network, node 2 hostname and IP address for the public network,
and default route. The public network addresses must be on the same
network.
g.
NSC SNMP agent configuration
Enter the name of the person responsible for the cluster and the
location of the cluster. Default values are supplied for the other
fields. Each field is described in the lower region of the screen as
you tab to the field. Press F1 for information that can help you to fill
out the fields.
h.
Save responses
Responses can be saved, except for the date, to a formatted diskette
for future installations. Unencrypted passwords are not saved.
A final screen indicates that the installation is complete.
5. Remove the CD, and then press Enter to reboot. The SCOadmin license
manager automatically runs.