Compaq 195294-001 - ProLiant - ML370R Quick Install Manual page 34

Use the cabling suggestions illustrated in Figure 2-3 to label the ServerNet I
cables.
ServerNet I
Node
Switch Port
Number
Number
1 0
2 1
Figure 2-3. ServerNet I cable labeling suggestion
To cable the ServerNet I interconnect, follow these steps:
1. Connect a white-labeled ServerNet I X cable to the X connection on the
ServerNet I adapter in node 1.
2. Connect the other end of the cable to the corresponding ServerNet I
adapter X connection in node 2.
3. Complete the cabling by installing the ServerNet I Y cable in a similar
manner.
Cable
X ServerNet I cables
Tie
are identified with
Color
White cable ties.
X/Y Fabric
Identifier
Pink
Node
Identifier
Orange
Red ties are used only during
shipment and are to be removed
during onsite installation.
Setting Up Cluster Hardware 2-11