Digital Output - Magnavox MRV700VR - Dvd Recorder / Vcr Owner's Manual

E9490UD_EN.qx3 04.9.21

64 Digital Output

After connecting the Recorder to your TV and other equipment, you may
need to change the Recorder's Digital Output setting. Look to see which
Recorder audio jacks you connected to your other equipment, then set
Digital Output accordingly.The information in step 4 will help you decide.
Adjust Digital Output only if you used the Recorder's COAXIAL DIGITAL
AUDIO OUT jack. See page 16. (If you used the white/red AUDIO OUT
L/R jacks, set Digital Output to Off. See page 65 to adjust the sound at
Analog Output.)
G
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
Press SYSTEM MENU. Press
corner of the menu bar at the top of the TV screen.
2 L repeatedly to select G, then press B.
Press
3
Digital output will be selected. Press B.
4
Press K or L to select Off, PCM only, or All, then press OK.
G
Select Off if you did not use the COAXIAL DIGITAL AUDIO
OUT jack.
G
Select PCM only if you used the Recorder's COAXIAL DIGITAL
AUDIO OUT jack for connections, but your Stereo does not
include a built-in digital multi-channel decoder. PCM represents Pulse
Code Modulation.
G
Select All if you connected the Recorder's COAXIAL DIGITAL
AUDIO OUT jack to a Stereo that has a built-in multi-channel
decoder. See page 16.
W X
~
1 2
Digital output
G
Analog output
Night mode
r
5
Press SYSTEM MENU to remove the menus.
10:54 AM Page 64
s to select
Y Z a
1en off no off
Sound
s Off
PCM only K
L
All
in the top left
1,5
1-4