Videotape To Dvd Duplication - Magnavox MRV700VR - Dvd Recorder / Vcr Owner's Manual

E9490UD_EN.qx3 04.9.21

44 Videotape to DVD Duplication

Follow the steps below to copy a videotape to a DVD+R or DVD+RW.This will be
possible only if the videotape is not copy protected.
G
Before you begin, turn on the TV and set it to channel 3 or its Video Input.
1
Put the videotape you want to copy in the cassette compartment.
With the Recorder in VCR mode, play the tape to the point at which you
want to start recording, then press STOP C.
2
Press DVD to put the Recorder in DVD mode. Insert a recordable
DVD+R/ DVD+RW in the disc tray. Use K or L to select a blank Disc
portion on which you can make the new recording.
3
Press REC SPEED/MODE
4
Press VCR so the VCR light appears on the front of the Recorder again.
5
Press D.DUBBING on the front of the Recorder.
recording standby mode.
I F
p a u s e
RW
3:00:00
0:00:00
012
6
Press D.DUBBING on the front of the Recorder again to start
recording. 'REC' will appear on the display panel.
I
r e c
RW
2:59:00
0:00:01
012
7
To stop recording, press STOP
appear.This may take several minutes.Your new recording will show in the
Index Picture Screen.
8
The unit will be in VCR mode.To watch the new recording on the
DVD+R/DVD+RW, press DVD to put the Recorder in DVD mode.
Use K or L to select the new Title, then press PLAY B.
10:54 AM Page 44
1
to choose a recording speed. See page 52.
C. Wait for the Index Picture Screen to
5,6
1,7
1,4
2
3
The unit will be in
2
2,8
8