Tape Counter 75 - Magnavox MRV700VR - Dvd Recorder / Vcr Owner's Manual

E9490UD_EN.qx3 04.9.21
Follow the steps below to reset a videotape's counter to zero at a tape
location you want to refer to later.
G
Before you begin, make sure the Recorder is in VCR mode. Press VCR so
the VCR light appears on the front of the Recorder.
1
Play, fast forward, or rewind a tape to the location that you
would like to refer to later. Press STOP
2
Press DISPLAY to see the status display.
SP 1 : 23 : 45
3
Press CLEAR to reset the counter to zero.
SP 0 : 00 : 00
4
Press DISPLAY to remove the status display.
5
When you later want to return to this point on the tape,
press DISPLAY while play is stopped so you can see the
counter on the TV screen. Press PREV/REW
NEXT/FF G.
As the tape rewinds or forwards, watch the counter.When it
approaches or reaches zero, press PLAY B to play the tape.
10:54 AM Page 75
002
Stereo
002
Stereo
3
C to stop the tape.
5
H or

Tape Counter 75

2,4-5
1
Helpful Hints
• You may only set the counter to
zero at one location at a time.
Setting the counter to zero at a
second location will erase the
previous zero setting.
• If you remove the tape, the
counter will reset to zero at the
point at which you last stopped
playback whenever you reinsert
the tape.