Time Search, Scan 41 - Magnavox MRV700VR - Dvd Recorder / Vcr Owner's Manual

E9490UD_EN.qx3 04.9.21
Time Search
Time Search lets you choose a specific elapsed playing time at which you
want to begin playback.
G
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
Press SYSTEM MENU during Disc play so Menu Bar 1
appears at the top of the TV screen.
2
Press B repeatedly to select
3
Press L. Play will pause. A time edit box will appear, showing the
elapsed playing time of the current Chapter or Disc.
d H
st
L
F
DVD pause
total time
1:41:05
elapsed playing time
0:02:32
Status box
4
Press the Number buttons to enter the time at which you
want play to begin.
to right in the box.
The time must be within the possible time of the current Chapter or
Disc. If it is not, play will not begin after you press OK at step 5.
Instead, a space in the time edit box will blink. Or, play may begin at the
wrong time. Refer to the Status box to see the time available, then
enter a correct time.
5
Press OK. After a few seconds, play will resume at the point you
selected.
6
Press SYSTEM MENU
Scan
Scanning plays the first 10 seconds of each Chapter/Track on the Disc.
G
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
1
Press PLAY MODE repeatedly during play until "scan"
appears on the TV screen.
Chapter/Track, the first 10 seconds of each Chapter/Track will play.
This will continue until the end of the Disc is reached or you
resume regular playback.
2
To stop scanning and continue regular play, press PLAY
10:54 AM Page 41
in Menu Bar 2.
E
K
0:02:32
s B time edit box
Enter the hour, minutes, and seconds from left
to remove the Menu Bar.
Starting with the current

Time Search, Scan 41

2,3,5
B.
1,6
4
1
2