Dynex DX-WBRDVD1 User Manual page 8

8
# Item
4
(play/pause)
5
USB port
6
(standby/on)
Back
# Item
1
Power connector
2
ETHERNET jack
3
WIFI antenna
4
HDMI OUT
5
AUDIO OUT L/R
6
COAXIAL DIGITAL OUT
7
VIDEO OUT
Press to start or pause playback.
Plug a USB flash drive into this port.
Press to turn on your player or put your player in standby mode. When
your player is in standby mode, power is still entering your player. To
disconnect power, unplug the power cord.
Plug the power cord into a power outlet.
Connect an ethernet cable to this jack and to a broadband Internet jack to
access BD-Live information or run connected applications.
Connects the player wirelessly to your wireless network.
Connect a TV to this jack using an HDMI cable. An HDMI cable carries both
video and audio.
Connect the audio for a composite TV to these jacks.
Connect a coaxial digital amplifier to this jack to play the sound through
the amplifier's speakers.
Connect a TV to this jack and to the AUDIO OUT L/R jacks using a
composite video cable (not provided).
DX-WBRDVD1/DX-WBRDVD1-CA
Description
Description