Dynex DX-WBRDVD1 User Manual page 12

12
3 Replace the battery compartment cover.
Notes:
Connecting a TV using an HDMI cable (best)
To connect a TV using an HDMI cable:
• Connect an HDMI cable to the HDMI jack on the back of your player and to the
Notes:
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix old and new batteries.
• Do not try to recharge non-rechargable batteries.
• If the remote control does not function correctly or if the operating range becomes
reduced, replace the batteries.
HDMI IN jack on the TV.
TV
• Only the HDMI is capable of 1080p video output and the highest definition audio
codecs.
• An HDMI cable carries both video and audio. If you want to use TV speakers, you do
not need to make an audio connection if you are using an HDMI cable. If you want to
use an HDMI-capable audio receiver, connect an HDMI cable between your player and
the HDMI input on the receiver.
DX-WBRDVD1/DX-WBRDVD1-CA
Back of player