Installing The Front I/O Panel - Dell XPS DC01L Owner's Manual

book.book Page 169 Tuesday, November 27, 2007 10:29 AM
1
1 Front I/O panel
8 Remove the two screws that hold the I/O panel assembly to the front of
the chassis.
9 Gently ease out the lower end of the I/O assembly first from its groove on
the chassis followed by the upper end.

Installing the Front I/O Panel

CAUTION:
safety instructions in the Product Information Guide.
NOTICE:
Ensure that you replace all cables originally attached to the I/O panel or
you computer may not function properly.
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
Before you begin any of the procedures in this section, follow the
2 mounting screws (2)
Removing and Installing Parts
2
169