Enabling The Qrt Feature In System Setup; Enabling The Qrt Feature In The Operating System; Using Multimedia; Playing Cds Or Dvds - Dell XPS DC01L Owner's Manual

book.book Page 42 Tuesday, November 27, 2007 10:29 AM

Enabling the QRT Feature in System Setup

The QRT drivers must be installed before the Quick Resume feature becomes
active. The QRT drivers are installed when this option is ordered. Also, Quick
Resume is enabled in system setup when this feature is ordered.
1 Enter system setup (see "Entering System Setup" on page 179).
2 Press the arrow keys to highlight the Power Management menu option,
then press <Enter> to access the menu.
3 Press the up- and down-arrow keys to highlight the Quick Resume option,
then press <Enter> to access the menu.
4 Press the left- and right-arrow keys to highlight the On option, and then
press <Enter> to enable the Quick Resume feature.

Enabling the QRT Feature in the Operating System

1 Click the Start
2 Click the Away tab.
3 Ensure that the check boxes for Enable away mode and Options are checked.
4 Click the Advanced tab.
5 From the When I press the power button on my computer drop-down
menu, select Do Nothing.
6 From the When I press the sleep button on my computer drop-down
menu, select Do Nothing.

Using Multimedia

Playing CDs or DVDs

NOTICE:
Do not press down on the CD/DVD tray when you open or close it. Keep
the tray closed when you are not using the drive.
NOTICE:
Do not move the computer while playing CDs or DVDs.
1 Press the eject button on the right corner of the drive.
2 Place the disc, label side up, in the center of the tray.
3 Press the eject button or gently push in the tray.
42
Setting Up and Using Your Computer
button, then click Control Panel.