Dell XPS DC01L Owner's Manual page 185

book.book Page 185 Tuesday, November 27, 2007 10:29 AM
Suspend Mode
(S3 default)
Quick Resume
Maintenance
Service Tag
SERR Message
(On default)
Load Defaults
Event Log
POST Behavior
Fastboot
(On default)
Numlock Key
(On default)
Specifies the power management suspend mode.
• S1 — The computer resumes more quickly from sleep mode.
• S3 — The computer conserves more power when not in use
(system memory remains active).
This feature enables/disables the Intel
Technology.
The default setting is Off.
Displays the system service tag.
Controls the SERR message mechanism. Some graphics cards
require that the SERR Message mechanism be disabled.
• Off — Do not use the SERR message mechanism.
• On — Use the SERR message mechanism.
This setting restores the computer's factory-installed default
settings.
• Cancel — Do not restore factory-installed default settings.
• Continue — Restore factory-installed default settings.
Displays the system event log.
• Mark all entries — Mark all event log entries as read (R).
• Clear log — Clear all event log entries.
NOTE:
Once an event log entry is marked as read (R) that entry
cannot be marked as unread (U).
Enables or disables the option to speed up the boot process by
skipping certain configurations and tests.
• Off — Do not skip any steps in the boot process.
• On — Boot quickly.
Enables or disables the numerical and mathematical features
of the rightmost bank of keys on the keyboard.
• Off — Right keypad keys function as arrows.
• On — Right keypad keys function as numbers.
®
Viiv™ Quick Resume
185
Appendix