Table of Contents
Advertisement
Dust disposal
To obtain the best results from your
cleaner be sure to check and empty the
dust compartment regularly, otherwise
the airflow and cleaning power of your
cleaner will be reduced and you may
damage your cleaner.
1 Ensure the cleaner is switched off
and disconnected from the mains
supply.
2 Press in the dust compartment
release button
and slide off the
dust compartment at an angle.
3 Pull out the filter as shown.
4 Empty the dust compartment into the
bin.
5 Clean the filter as described page 6.
6 Replace the filter into the dust
compartment.
7 Replace the dust compartment by
locating the tab on the dust
compartment with the slots on the
cleaner and click into position.
IMPORTANT
• All filters should be checked
regularly for signs of damage,
preferably after each cleaning task.
The filters must be replaced
immediately if they become
damaged.
• Always disconnect the cleaner from
the mains when checking filters or
replacing dust compartment.
• Always make sure the dust
compartment and filters are fitted
before use. Failure to do so may
result in damage to your product.
5
Advertisement
Table of Contents
