Table of Contents
Advertisement
73091 Rev 3
15/6/05
To use as a handheld
1 Remove the telescopic handle. To remove,
press in the release button
handle out.
2 Remove the floor nozzle by pressing in the
Ï
release button
nozzle away from the body
3 Slide the hose end
Á
I
location
.
4 Fit the extension tube
Ë.
5 Fit the crevice tool
6 If required fit the brush
crevice tool
7 Press the switch to position I .
Attachments
Uses for the brush attachment include
stairs, upholstery, mattresses, curtains and hard
surfaces like door mouldings and skirting
boards. The crevice tool is particularly useful for
cobwebs and in narrow gaps in the car around
the handbrake and seat.
9:18 AM
Page 5
B
⁄
and lift the
and pulling the floor
H
.
Ë
from the hose end
to the hose end
Ò
to the extension tube.
Ú
to the end of the
H
I
Dust disposal
Ensure the Pod is switched off and
disconnected from the mains supply.
1 Slide the pod release button up and pull the
dust pod away from the cleaner.
Note: When the floor nozzle is fitted the
cleaner must be tilted slightly backwards to
remove the dust pod.
2 Raise up the folded filter handle in the top of
the filter assembly.
3 Use the handle to rotate the filter for a few
turns. This agitates the filter loosening the
K
dust.
5
J
J
K
Advertisement
Table of Contents
