Dell POWERVAULT NX200 Hardware Owner's Manual page 35

Table 1-1. LCD Status Messages
Code Text
I1911 LCD Log Full.
Check SEL to
review all
Errors.
I1912 SEL full.
Review &
clear log.
W1627 Power
required
> PSU
wattage.
Check PSU and
config.
W1628 Performance
degraded.
Check PSU and
system
configur-
ation.
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
Glossary at support.dell.com/manuals.
(continued)
Causes
LCD overflow message.
A maximum of ten error
messages can be displayed
sequentially on the LCD.
The eleventh message
instructs the user to
check the SEL for details
on the events.
The SEL is full of
events and is unable to
log any more.
The system configuration
requires more power than
what the power supply can
provide.
The system configuration
requires more power than
what the power supply
can provide, but it can
boot if throttled.
Corrective Actions
Check the SEL for details
on the events.
Remove AC power to the
system for 10 seconds or
clear the SEL.
Check the SEL for more
information and then clear
the SEL.
Turn off power to the
system, reduce the
hardware configuration or
install higher-wattage
power supply, and then
restart the system.
Turn off power to the
system, reduce the
hardware configuration or
install higher-wattage
power supply, and then
restart the system.
About Your System
35