Removing and installing wheel
bearings
•
Carefully lever out the shaft sealing ring with a
screwdriver.
•
Remove the circlip.
00 8 572
00 8 574
36 6 640
36 5 513
•
Clamp a drift, BMW No. 36 5 513, into the vise
and place the wheel on it with the wide bearing
down.
•
Place a spacing ring, BMW No. 36 6 640, be-
tween the wheel hub on the right and the claws
of the internal puller.
•
Heat bearing seat to 80 °C (176 °F).
•
Pull out the wheel bearing with
counter-support 22/1, BMW No. 00 8 572, and
internal puller 21/3, BMW No. 00 8 574.
36.6
1
2
S360020
•
Remove spacer bushing (1).
•
Heat bearing seat to 80 °C (176 °F).
•
Press out wheel bearing (2) with drift,
BMW No. 36 5 530.
•
Degrease bearing seats.
•
Heat bearing seat to 80 °C (176 °F).
S360100
•
First insert wide bearing using drift,
BMW No. 36 5 512, and handle,
BMW No. 00 5 500.
36 5 530
RS360023
00 5 500
36 5 512
S360090