Removing and installing headlight
e
Caution:
Switch off ignition.
Disconnect earth (ground) lead from battery.
Insulate earth (ground) lead.
Do not touch inner surface of reflector or bulbs with
bare hands.
•
Remove side panels.
•
Remove mirrors.
•
Remove the windscreen.
•
Disconnect headlight plug from socket at front
right fairing bracket.
•
Remove screws securing the front fairing panel.
•
Remove front fairing panel complete with head-
light.
•
Remove headlight.
•
Installation is the reverse of the removal proce-
dure.
•
Switch on the ignition.
•
Without starting the engine, fully open the throttle
once or twice so that the Motronic control unit
can register the throttle-valve positions.
L
Note:
Disconnecting the battery deletes all entries (e.g.
faults, settings) stored in the Motronic control unit's
memory.
Loss of settings can temporarily impair the operat-
ing characteristics when the engine is restarted.
Adjusting headlight
•
Motorcycle on level surface.
•
Rider's weight on motorcycle (approx.80 kg/
176 lbs).
•
Move swivel lever to horizontal position (basic
setting).
•
Turn the adjusting screw to correct the headlight
beam throw.
Lateral adjustment:
....................... Adjusting screw on left of headlight.
Vertical adjustment:
.....................Adjusting screw on right of headlight.
Turn screw anti-clockwise:............... longer throw
Turn screw clockwise: ..................... shorter throw
Setting:
.... -12 cm (-4.7 in) over a distance of 10 m (32.8 ft)
S630010
S000240
63.5