1
9
Removing selector drum
•
Pull the selector shafts (1) out of the selector
forks.
•
Swing the selector forks (3/8) out towards the
edge of the cover (arrows).
•
Remove locking pin (9).
•
Press guide plate (5) in the opposite direction to
the spring loading (arrow).
•
Swing locking lever (6) towards input shaft (7),
hold it there and pull out the selector drum (4),
turning it slightly at the same time.
•
Remove the thrust washers and spacing washer.
•
Release the locking lever (6).
•
Remove the selector shaft (7) with spacing
washer.
•
Remove selector forks (3).
•
Selector fork (8) remains in the intermediate
shaft (10).
23.10
10
8
7
Disassembling/assembling selector
shaft
•
Remove torsion spring (5) with locking lever (4)
from selector shaft (2).
•
Remove torsion spring (1).
•
Disengage coil spring (6) and remove together
with guide plate (3).
•
Assembly is the reverse of the disassembly pro-
cedure.
2
3
4
5
6
6
1
S230040
1
2
3
4
5
KR230050