Blackberry PEARL 8100 - S-MIME SUPPORT PACKAGE FOR DEVICES USER GUIDE User Manual page 30

User Guide Supplement
Note:
The physical range for Bluetooth technology on the
BlackBerry Smart Card Reader might vary depending
on the environment in which the BlackBerry Smart
Card Reader is used.
Related topic
Set when the Bluetooth connection stops (See page
30.)
Set when the Bluetooth connection
stops
Each period, your BlackBerry® device sends a signal
(heartbeat) that the BlackBerry Smart Card Reader
acknowledges. If either your BlackBerry device or the
BlackBerry Smart Card Reader misses the heartbeat or
response, the Bluetooth® connection closes.
1. In the BlackBerry device options, click Security
Options.
2. Click Smart Card.
3. In the Registered Reader Drivers section, click
BlackBerry.
4. Click Driver Settings.
5. In the Reader Settings section, set the
Connection Heartbeat Period field.
6. Press the Menu key.
7. Click Save.
Related topic
Set the Bluetooth range for the BlackBerry Smart Card
Reader (See page 29.)
Set options to clear secure pairing
information for the BlackBerry Smart
Card Reader
1. In the BlackBerry device options, click Security
Options.
2. Click Smart Card.
30
3. In the Registered Reader Drivers section, click
BlackBerry.
4. Click Driver Settings.
5. In the Erase Key After section, perform one or
more of the following actions:
• Set the Disconnected Timeout field to the
period of time after a Bluetooth® connection
closes that passes before your BlackBerry
device and your BlackBerry Smart Card
Reader should clear secure pairing
information.
• Set the Erase ALL keys field to specify
whether your BlackBerry device clears secure
pairing keys for paired computers when the
Disconnected Timeout occurs.
• Set the Long Term Timeout field to the period
of time that passes before your BlackBerry
device and your BlackBerry Smart Card
Reader should clear secure pairing
information.
• Set the Inactivity Timeout field to the period
of time with no secure Bluetooth traffic
between your BlackBerry device and your
BlackBerry Smart Card Reader that passes
before your BlackBerry device and your
BlackBerry Smart Card Reader should clear
secure pairing information.
• Set the Card Not Present Timeout field to the
period of time after the smart card is removed
from your BlackBerry Smart Card reader that
passes before your BlackBerry device and your
BlackBerry Smart Card Reader should clear
secure pairing information.
• Set the Number Of Transactions field to
specify the number of transactions that occur
before your BlackBerry device and your
BlackBerry Smart Card Reader should clear
secure pairing information.
6. Press the Menu key.
7. Click Save.