Blackberry PEARL 8100 - S-MIME SUPPORT PACKAGE FOR DEVICES USER GUIDE User Manual page 10

User Guide Supplement
Set a certificate to trusted
1. In the device options, click Security Options.
2. Click Certificates.
3. Highlight an untrusted certificate.
4. Press the Menu key.
5. Click Trust.
6. If the certificate is not a root certificate, a prompt
appears. Perform one of the following actions:
• To trust only the highlighted certificate, click
Selected Certificate.
• To trust the entire certificate chain by trusting
the root certificate, click Entire Chain.
Related topics
About certificates (See page 7.)
About certificate icons (See page 7.)
Set a certificate to not trusted (See page 10.)
Set a certificate to not trusted
1. In the device options, click Security Options.
2. Click Certificates.
3. Highlight a trusted certificate.
4. Press the Menu key.
5. Click Distrust.
Related topic
About certificates (See page 7.)
About certificate icons (See page 7.)
Send a certificate to a contact
1. In the device options, click Security Options.
2. Click Certificates.
3. Highlight a certificate.
4. Press the Menu key.
10
5. Click Send via Email or Send via PIN.
Note:
When you send a certificate, only the public key is sent
and not the private key.
Related topics
Attach a certificate to a message (See page 24.)
Import a certificate from a message (See page 21.)
Add an email address association to a
certificate
1. In the device options, click Security Options.
2. Click Certificates.
3. Highlight a certificate belonging to another
person.
4. Press the Menu key.
5. Click Associate Addresses.
6. Click the trackball.
7. Click Add Address.
8. Click [Use Once].
9. Type an email address.
10. Click the trackball.
11. Press the Menu key.
12. Click Save.
To remove the associated address, click the address.
Click Delete Address.
Related topics
About the key store (See page 13.)
Filter certificates (See page 8.)
Set options for checking the status of
a certificate
1. In the device options, click Security Options.