Operating The Camera With The Computer - Minolta DIMAGE V - WINDOWS Software Instruction Manual

LAUNCHING THE SOFTWARE

OPERATING THE CAMERA WITH THE COMPUTER

Start the Camera Access application.
Select Twain from the File menu, then Acquire...
from the submenu.
The QTIC Main Panel will appear.
In the QTIC Main Panel:
• Control the Dimâge V functions (recording, flash mode, image quality
mode, self-timer) with the computer.
• Format SmartMedia.
• Display the camera status (frames remaining, frames taken, and low
battery warning).
+ See page 61 for more information.
Select Record Mode from the Camera menu.
Set the flash mode and select the image
quality, then click on Capture.
Open the viewer panel and double-click on
the thumbnail of the captured image.
18
The image will be displayed in the Image panel.
In the Image Panel:
• Edit images (crop, adjust brightness/contrast, adjust color
balance, flip, rotate, change bit depth, retouch, invert, and resize).
• Magnify or reduce the view of images.
• Print the displayed image.
+ See page 39 for more information.
Select Save As... from the File menu.
Enter the new file name.
Select the folder/directory where the file is to be saved.
Select the format and image depth for the file.
Click on Save/OK.
The image will be saved in the selected file format.
Once the image is saved:
• Display the thumbnail preview of the image.
• Open the image with another application software.
• Incorporate the image into an original post card or calendar using
Adobe PhotoDeluxe™, included in this package.
19