Floppy Drive
CAUTION:
Product Information Guide.
CAUTION:
before removing the cover.
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 88.
Removing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 53.
2 Remove the drive panel (see page 77).
3 Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you are installing a PCI Express x16 card, this card may cover the floppy-drive connectors.
Remove this card before connecting the floppy-drive cables
86
Removing and Installing Parts
Before you begin any of the procedures in this section, follow the safety instructions in the
To guard against electrical shock, always unplug your computer from the electrical outlet
power cable
data cable
.