Dell DIMENSION 5100 User Manual page 89

power cable
6 If you are installing a new floppy drive rather than replacing a drive, remove the drive-panel
inserts (see page 86).
7 Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
8 Replace the drive panel (see page 79).
9 Replace the computer cover (see page 99).
NOTICE:
To connect a network cable, first plug the cable in to the network device and then plug it in to
the computer.
10 Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
11 Enter system setup (see page 105) and select the appropriate Diskette Drive option.
12 Verify that your computer works correctly by running the Dell Diagnostics (see page 46).
data cable
Removing and Installing Parts
89