Mouse Problems - Dell DIMENSION 5100 User Manual

I F Y O U E X P E R I E N C E O T H E R M E M O R Y P R O B L E M S
• Reseat the memory modules (see page 65) to ensure that your computer is successfully communicating
with the memory.
• Ensure that you are following the memory installation guidelines (see page 65).
• Your computer supports DDR2 memory. For more information about the type of memory supported by
your computer, see "Memory" on page 101.
• Run the Dell Diagnostics (see page 46).

Mouse Problems

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
C L E A N T H E M O U S E — See "Mouse" for instructions on cleaning the mouse on page 115.
C H E C K T H E M O U S E C A B L E
1
Remove mouse extension cables, if used, and connect the mouse directly to the computer.
2
Reconnect the mouse cable as shown on the setup diagram for your computer.
E S T A R T T H E C O M P U T E R
R
1
Simultaneously press <Ctrl><Esc> to display the Start menu.
2
Type u, press the keyboard arrow keys to highlight Shut down or Turn Off, and then press <Enter>.
3
After the computer turns off, reconnect the mouse cable as shown on the on the setup diagram for your
computer.
4
Start the computer.
E S T T H E M O U S E — Connect a properly working mouse to the computer, and try using the mouse.
T
C H E C K T H E M O U S E S E T T I N G S
1
Click the Start button, click Control Panel, and then click Printers and Other Hardware.
2
Click Mouse.
3
Try adjusting the settings.
R E I N S T A L L T H E M O U S E D R I V E R
R U N T H E H A R D W A R E T
—
—
—
— See page 48.
— See page 49.
R O U B L E S H O O T E R
—
35
Solving Problems