Safety Cautions - SMC Networks HPAV-ETH2 - annexe 1 User Manual

2 Safety Cautions

This device is used for connection to the AC electrical wiring. In order to use the
device correctly and safely please read the instructions before using the device.
For installation instructions, please refer to the installation section of this user
guide.
Follow all the warnings and instructions marked on the product.
Before cleaning the device, unplug it from the wall outlet. Use a dry cloth
for cleaning. Do not use liquid or aerosol cleaners.
Do not place the device near water.
Do not place the device near or over a radiator or heat register.
Do not use an extension cord between the device and the power outlet.
Only professional technicians should service the device. Opening or
removing covers may result in exposure to dangerous voltage points or
other risks.
Unplug the device from the power outlet and refer to professional service
personnel for the following conditions:
– If liquid has been spilled into the product.
– If the device has been exposed to rain or water.
If the device does not operate normally when following the operation
–
instructions.
– If the device shows a significant change in performance.
2