Preface; Important Safety Instructions - SMC Networks HPAV-ETH Manual

PREFACE

This document describes the installation of the SMCHPAV-ETH device.
Please read this document before installing the product.
This publication contains the following sections:

Important safety instructions

The first thing you need to know before you begin to install
Product installation guide
Specification
IMPORTANT SAFETY INSTRUCTIONS
This product is intended for connection to the AC power line. For installation instructions,
please refer to the Installation section. For removing the device, refer to the Unplug
section. The following precautions should be considered when using this product.
Please read all instructions before installing and operating this product.
Please keep all instructions for later reference.
Please follow all warnings and instructions marked on the product.
Unplug the powerline adapter from the power outlet before cleaning the product.
Use a damp cloth for cleaning. DO NOT use liquid or aerosol cleaners.
DO NOT operate this product near water.
This product should never be placed near or over a radiator, or heat register.
This product relies on the building's electrical installation for short-circuit (over
current) protection.
Ensure that a fuse or circuit breaker no larger than 120VAC/20A or 240VAC/16A
is used on the phase conductors (all current-carrying conductors).
DO NOT allow anything to rest on the product interconnect cords. DO NOT install
this product where people may walk on the cords.
Because the SMCHPAV-ETH device sends data over the powerline, it is
recommended that you plug it directly into a power outlet. Do not plug the device
into a UPS or power strip with surge protection. The SMCHPAV-ETH device has its
own power filter for protection against surges.
The product can be operated at an ambient temperature of 40
For pluggable equipment, the socket-outlet shall be installed near the equipment
and shall be easily accessible.
6
o
C.