Leaving A Network - SMC Networks HPAV-ETH2 - annexe 1 User Manual

the SYNC button on the 'adder' is pressed again or the 'joiner' is reset by
pressing the RESET button down for more than 10 seconds.

6.3 Leaving a Network

In this scenario a Powerline network exists and one device, the 'leaver', should
be removed from the network. The user either wants to remove the device
completely or have it join another logical network.
1. Press the SYNC button on the 'leaver' for at least 10 seconds. The
device resets and restarts with a random SYNC.
2. Wait for the reset to complete.
The Power LED on the 'leaver' momentarily extinguishes during reset, blinks
during restart, then illuminates steadily. No error occurs.
The user can disconnect the device from the medium or join it to another logical
network on the same medium when the reset process is completed.
Figure 6-2: Joining a network
19