Leaving A Network - SMC Networks HPAV-ESW Manual

6.3 Leaving a Network

In this scenario a Powerline network exists and one device, the 'leaver', should be removed from the network. The
user either wants to remove the device completely or have it join another logical network.
1. Press the SYNC button on the 'leaver' for at least 10 seconds. The device resets and restarts with a
random SYNC.
2. Wait for the reset to complete.
The Power LED on the 'leaver' momentarily extinguishes during reset, blinks during restart, then illuminates steadily.
No error occurs.
The user can disconnect the device from the medium or join it to another logical network on the same medium when
the reset process is completed.
Figure 6-3: leaving a network
18