SMC Networks HPAV-ETH Manual page 16

Figure 3. Set Device Password
"Add Remote" button
The "Add Remote" button is used to add a remote device which is not listed in the lower
window to your logical network (for example, a device is currently in another logical
network). The dialog box in Figure 4 is shown after clicking the "Add Remote" button,
and it allows you to enter both, the device name and the password of the remote device
you want to add. The device will be added to your logical network only if the Network
Name (see chapter 3.4.2) and Password (see password on the device label) are both
correct. Like the "Enter Password" function, incorrect passwords will be warned and
denied.
Figure 4. Add Remote Device
15