SMC Networks HPAV-ETH Manual page 25

Step 4. The new device starts to communicate with the device from the existing private
network, and tries to join the existing private network. It will complete the
process within 10 seconds. On the new device's all LEDs are turned off and on
again. The existing private network device's "Power" LED become solid.
Note: The setup operation timeout is 120 seconds.
Step 5. If the process to add a new device to an existing private network failed, please
repeat step 1 to step 3 again.
3. Remove a device from an existing private network:
To remove a device from existing network, press and hold the device's "Security"
button for more than 10 seconds to clear the private network name setting and generate
a new random private network name. This will remove the device from the existing
private network. To recover the private network name back to default, a hardware reset
is required. Please press reset button.
※Reset Button Usage:
1. Reset the device to the factory default setting:
Press the device's "Reset" button for 2 seconds. You will see all the device's LEDs
are off and restart. The device's setting will reset to the "factory defaults".
24