Show Ip Redirects; Ping - SMC Networks 8624T - annexe 1 Management Manual

show ip redirects

Use this command to show the default gateway configured for this
device.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip redirects
ip default gateway 10.1.0.254
Console#
Related Commands
ip default-gateway

ping

Use this command to send ICMP echo request packets to another node on
the network.
Syntax
ping host [count count][size size]
• host - IP address or IP alias of the host.
• count - Number of packets to send. (Range: 1-16, default: 5)
• size - Number of bytes in a packet. (Range: 32-512, default: 32)
The actual packet size will be eight bytes larger than the size specified
because the switch adds header information.
Default Setting
This command has no default for the host.
Command Mode
Normal Exec, Privileged Exec
IP C
OMMANDS
3-55