Displaying Interfaces Attached to a Multicast Router
Command Attributes
•
VLAN ID – ID of configured VLAN (1-4094).
•
Multicast Router List – Multicast routers dynamically discovered by
this switch or those that are statically assigned to an interface on this
switch.
Web – Click IGMP/Multicast Router Port Information. Select the
required VLAN ID from the scroll-down list to display the associated
multicast routers.
CLI – This example shows that Port 11 has been statically configured as a
port attached to a multicast router.
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------ -------
1
Specifying Interfaces Attached to a Multicast Router
Depending on your network connections, IGMP snooping may not always
be able to locate the IGMP querier. Therefore, if the IGMP querier is a
known multicast router/switch connected over the network to an interface
Eth 1/11 Static
M
C
ULTICAST
ONFIGURATION
3-120
2-73