About The Tigerstack 100; Overview - SMC Networks 6924MT - annexe 1 Installation Manual

Overview

SMC's TigerStack™ 100 is a stackable switch with 24 100BASE-FX MT-RJ
ports, plus two slots for optional slide-in 100BASE-FX or 1000BASE-X
modules. One of these slots can also be used for an optional stacking
module that allows you attach up to four switches to a 9.6 Gbps high-speed
backplane. There is also an SNMP-based Network Management Module
installed in the rear panel. This module supports both in-band and
out-of-band access for managing the switch and the attached stack.
Note: A switch stack, or a switch in a standalone configuration, must have
Network Management Module installed to enable all ports. The base
unit alone has all ports disabled by default.
Figure 1-1. Front Panel
Figure 1-2. Rear Panel
T
IGER
Media or stack module
C
HAPTER
A
BOUT THE
S
TACK
Status
Activity
Network Management Module
24VF
Media module
1
100
1
1-1