Table of Contents
Advertisement
A
T
BOUT THE
IGER
Switch Architecture
The switch employs a wire-speed, non-blocking switching fabric. This
permits simultaneous wire-speed transport of multiple packets at low
latency on all ports. This switch also features full-duplex capability on all
ports, which effectively doubles the bandwidth of each connection.
Auto-negotiation is used to select the optimal transmission speed and
communication mode for each connection. With store-and-forward
switching and flow control, maximum data integrity is always maintained,
even under heavy loading.
This switch includes two slots on the front panel for slide-in 1000BASE-T,
100BASE-FX, or 1000BASE-X (GBIC) modules. Cascade connections
between switches can be made using these modules.
The switch also supports a stacking module that can be installed into slot
M2. The stacking module allows up to eight units to be linked together and
managed from one unit using one IP address.
1-2
S
III 10/100
TACK
Advertisement
Table of Contents
