Table of Contents
Advertisement
Configuring Bridge STA
The following figure and table describe Bridge STA configuration.
Spanning Tree Configuration : Bridge STA Configuration
======================================================
Spanning Tree Protocol
Priority
Hello Time (in seconds)
Max Age (in seconds)
Forward Delay (in seconds): 15
<APPLY>
Use <TAB> or arrow keys to move, <Space> to scroll options,
Parameter
Default
Spanning Tree
Enabled
Protocol
Priority
32,768
Hello Time
2
U
SING THE
<OK>
other keys to make changes.
Description
Enable this parameter to participate in a
STA-compliant network.
Device priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. However, if all devices have
the same priority, the device with the lowest
MAC address will then become the root
device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value,
the higher the priority.
Time interval (in seconds) at which the root
device transmits a configuration message.
The minimum value is1.
The maximum value is
the lower of 10 or [(Max. Message Age / 2) -1].
S
C
YSTEM
ONFIGURATION
: ENABLED
: 32768
: 2
: 20
<CANCEL>
P
ROGRAM
2-29
Advertisement
Table of Contents
